Produsent informasjon
The set positions of the 300N give ample choice of rotation angle and so of number of photos needed to complete a 360° pan and cover the most common requests of panoramic photographers depending on the camera/lens equipment used. To make angle selection easier, a "click-stop" selector screw is included and attached to a safety cable to prevent it from being separated from the head and getting lost. The 300N also comes complete with a secondary locking screw which stops unwanted or accidental rotation of the head when heavy or off-centre equipment makes it less balanced or when the head is used for non-horizontal rotation. The 300N can also be used as a turntable base for object panoramas, or as a means of reading the angle of rotation of camera pan movements in a range of photography. A camera can be mounted on the panoramic unit by adding one of a range of quick release, sliding or fixed plates or a conventional geared, ball or 3-way head. 303N Features:
- Upper dual graduated scale to set the angle of rotation to any of the following: 90°, 60°, 45°, 36°, 30°, 24°, 20°, 15°, 10°, 5° (respectively equivalent to 4, 6, 8, 10, 12, 15, 18, 24, 36 or 72 photos to achieve a full 360° rotation based on 35mm film frames or 24x36mm CCD).
- Lower graduated scale from 0° to 360°.
- 3/8" female tripod fitting; 3/8" male screw head or plate fitting.
| height | 6.3 cm |
|
|
|
| weight | 0.61 kg |
|
|
|
| load capacity | 14.00 kg |
|
|
|
| panoramic rotation | 360 ° |
|
|
|
| color | black |
|
|
|
| material | aluminum |
|
|
|
| independent pan lock | yes |
|
|
|
| attachment (top) | 3/8» screw |
|
|
|
| attachment (bottom) | 3/8" female thread |
